Fabrication,microstructural characterization and gas permeability behavior of porous silicon nitride ceramics with controllable pore structures

Porous Si₃N₄ ceramics with monomodal and bimodal pore structure were prepared by cold isostatic pressing and freeze-casting, respectively. Both the pore structure and permeability behavior of the porous Si₃N₄ ceramics were tailored by altering the pressure of cold isostatic pressing and the composition and content of solvent during freeze-casting. The specimens obtained by cold isostatic pressing exhibited smaller Darcian and non-Darcian permeability than those of freeze-casted samples due to their lower open porosity, smaller pore size and higher tortuosity. On the other hand, compared with the ice-templated specimens having the same solvent volume in the ceramic slurries as them during freeze-casting, the emulsion-ice templated samples showed smaller open porosity, macropore size and Dacian permeability, but the similar non-Darcian permeability because of their larger micropores and better pore interconnectivity.     

Structure variation and energy storage properties of acceptor-modified PBLZST antiferroelectric ceramics

Energy storage capacitors with high recoverable energy density and efficiency are greatly desired in pulse power system. In this study, the energy density and efficiency were enhanced in Mn-modified (Pb_0.93Ba_0.04La_0.02)(Zr_0.65Sn_0.3Ti_0.05)O₃ antiferroelectric ceramics via a conventional solid-state reaction process. The improvement was attributed to the change in the antiferroelectric-to-ferroelectric phase transition electric field (E_F) and the ferroelectric-to-antiferroelectric phase transition electric field (E_A) with a small Mn addition. Mn ions as acceptors, which gave rise to the structure variation, significantly influenced the microstructures, dielectric properties and energy storage performance of the antiferroelectric ceramics. A maximum recoverable energy density of 2.64 J/cm³ with an efficiency of 73% was achieved when x = 0.005, which was 40% higher than that (1.84 J/cm³, 68%) of the pure ceramic counterparts. The results demonstrate that the acceptor modification is an effective way to improve the energy storage density and efficiency of antiferroelectric ceramics by inducing a structure variation and the (Pb_0.93Ba_0.04La_0.02)(Zr_0.65Sn_0.3Ti_0.05)O₃-xMn₂O₃ antiferroelectric ceramics are a promising energy storage material with high-power density.     

纳米碳化钒/碳化铬复合粉末的微波辅助高能球磨合成及其应用

以微米级氧化钒(V2O5)、氧化铬(Cr2O3)和纳米碳黑为原料，采用机械合金化及微波辅助加热法制备了纳米碳化钒/碳化铬复合粉末。利用XRD、XPS、TG-DSC、SEM、TEM和BET对产物进行了分析表征。结果表明，：纳米碳化钒/碳化铬复合粉末的最佳合成条件为：碳的质量分数为35%，反应温度为900℃，保温时间为1h。在该条件下的反应产物主要由V3Cr2C5、Cr2VC2和Cr3C2组成，颗粒为球形或类球形，分散性较好，无明显团聚现象，平均颗粒尺寸约为50nm，复合粉末的比表面积为115.53m2/g。添加纳米碳化钒/碳化铬复合粉末可以提高陶瓷结合剂cBN磨具的力学性能和磨削效率，降低磨具的损耗，并且对磨具具有减摩作用。     

Moulded pulp products manufacturing with thermoforming

For an effective optimization of pulp thermoforming and of the moulded pulp products manufactured by this process, a full understanding of the process physics combined with full knowledge of the pressing equipment is necessary. For this reason, in this Addendum, we clarify how the process parameters “Holding time,” “Vacuum time,” “Cycle time,” and “Temperature” were interpreted and subsequently defined for the analysis of the process and product‐related outputs of the thermoforming experiments.     

Molecule-confined modification of graphitic C3N4 to design mesopore-dominated Fe-N-C hybrid electrocatalyst for oxygen reduction reaction

To design inexpensive carbon catalysts and enhance their oxygen reduction reaction (ORR) activity is critical for developing efficient energy-conversion systems. In this work, a novel Fe-N-C hybrid electrocatalyst with carbon nanolayers-encapsulated Fe₃O₄ nanoparticles is synthesized successfully by utilizing the molecular-level confinement of graphitic C₃N₄ structures via hemin biomaterial. Benefiting from the Fe-N structure prevalent on the carbon nanosheets and large mesopore-dominated specific surface area, the synthesized catalyst under optimized conditions shows excellent electrocatalytic performance for ORR with an E_ORR at 1.08 V versus reversible hydrogen electrode (RHE) and an E_1/2 at 0.87 V vs. RHE, and outstanding long-term stability, which is superior to commercial Pt/C catalysts (E_ORR at 1.04 V versus RHE and E_1/2 at 0.84 V versus RHE). Moreover, the low hydrogen peroxide yield (<11%) and average electron transfer number (~3.8) indicate a four-electron ORR pathway. Besides, the maximum power density of the home-made Zn-air battery using the obtained catalyst is 97.6 mW cm⁻². This work provides a practical route for the synthesis of cheap and efficient ORR electrocatalysts in metal-air battery systems.     

碘化多壁碳纳米管制备含有Ag/MWCNTs复合材料的银-环氧树脂浆料

提出一种将多壁碳纳米管碘化后制备银/多壁碳纳米管（Ag/MWCNTs）复合材料的方法。通过球磨对碘化多壁碳纳米管进行了功能化，并通过透射电子显微镜（TEM）、X射线衍射（XRD）、傅里叶变换红外光谱（FT-IR）、拉曼光谱和热重分析（TG）对其进行了表征。结果表明，经碘化处理后，银纳米粒子（Ag-NPs）能更好地粘附在碳纳米管表面，改善了银纳米粒子与碳纳米管之间的连接。羟基（-OH）基团的伸缩振动明显增强，激活了碳纳米管的表面，增加了碳纳米管表面Ag⁺形核的数量。在260 ℃以下，Ag/MWCNTs复合材料的质量损失小于MWCNTs的质量损失。最后，制备了银-环氧树脂浆料，发现使用Ag/MWCNTs复合物制备的浆料具有最低的电阻率和最高的热导率。     

Simulation studies on a rotating ring disk electrode: Effects of ionic migration with kinetic complication-disk results

In continuation to my previous work (Guha S. AIChE J. 2013;59(4):1390-1399), in this work, effects of ionic migration are evaluated for disk region of a rotating ring disk electrode system by numerically solving complex differential equations, developed for mass transfer along with kinetic complication in presence of ionic migration under limiting current condition. The system for simulation is 0.01 M Fe₂(SO₄)₃ solution with H₂SO₄ as supporting electrolyte. Simulation cases are presence and absence of ionic migration with kinetic complication (oxidation of Fe²⁺ to Fe³⁺ under O₂ pressure). Results show that concentration boundary layer thickness of reactant Fe³⁺ reduces appreciably and steady-state disk current reduces substantially in presence of migration. Simulated steady-state disk current in absence of migration case agrees well with published data. Results indicate higher Fe²⁺ concentration in presence of migration and thereby higher rate of oxidation of Fe²⁺ to Fe³⁺ at all rate constant values.     

Mechanical properties of Al2O3 and Al2O3/Al with Gyroid structure obtained by stereolithographic additive manufacturing and melt infiltration

To obtain both plasticity and toughness of the material at the same time, various manufacturing techniques of ceramic-metal composites and structures have been studied. In this work, a bio-inspired Al₂O₃ ceramic scaffold with Gyroid structure was designed and prepared by stereolithographic (SL) additive manufacturing, then the Al₂O₃/Al ceramic-metal hybrid structure was prepared by infiltrating molten Al into the Al₂O₃ ceramic structure. The performances of the Al₂O₃ ceramic scaffold and the Al₂O₃/Al ceramic-metal hybrid structure were compared and analyzed by a quasi-static compression experiment. The quasi-static compressive strength of the pristine Al₂O₃ scaffold was 14.36 MPa, while that of the Al₂O₃/Al ceramic-metal hybrid structure was up to 89.06 MPa. Moreover, the plasticity of the Al₂O₃/Al ceramic-metal hybrid structure was much higher than that of the Al₂O₃ scaffold. During compression, the Al₂O₃/Al ceramic-metal hybrid structure had excellent energy absorption, reaching up to 2569.16 KJ/m³, 15 times that of the Al₂O₃ scaffold. Therefore, this method can obtain materials with excellent ductility and toughness.     

Unique CNTs-chained Li4Ti5O12 nanoparticles as excellent high rate anode materials for Li-ion capacitors

Composite anode materials with a unique architecture of carbon nanotubes (CNTs)-chained spinel lithium titanate (Li₄Ti₅O₁₂, LTO) nanoparticles are prepared for lithium ion capacitors (LICs). The CNTs networks derived from commercial conductive slurry not only bring out a steric hindrance effect to restrict the growth of Li₄Ti₅O₁₂ particles but greatly enhance the electronic conductivity of the CNTs/LTO composites, both have contributed to the excellent rate capability and cycle stability. The capacity retention at 30 C (1 C = 175 mA g^?1) is as high as 89.7% of that at 0.2 C with a CNTs content of 11 wt%. Meanwhile, there is not any capacity degradation after 500 cycles at 5 C. The LIC assembled with activated carbon (AC) cathode and such a CNTs/LTO composite anode displays excellent energy storage properties, including a high energy density of 35 Wh kg^?1 at 7434 W kg^?1, and a high capacity retention of 87.8% after 2200 cycles at 1 A g^?1. These electrochemical performances outperform the reported data achieved on other LTO anode-based LICs. Considering the facile and scalable preparation process proposed herein, the CNTs/LTO composites can be very potential anode materials for hybrid capacitors towards high power-energy outputs.     

Improvement in the properties of low carbon MgO-C refractories through the addition of graphite-SiC micro-composite

Graphite–SiC micro-composites have been prepared in–house by carbothermal reduction process. Controlling the process parameters including the weight ratio of SiO₂ to graphite as well as carbothermal reduction temperature during the micro-composite preparation favors the homogeneous formation of SiC with preferred morphologies like ribbons and whiskers/fibers. The micro-composite modified low carbon MgO-C refractories have exhibited significantly improved bulk properties over the standard composition. To understand the beneficial role of SiC reinforcement on hot strength performance under air oxidizing conditions, we propose a scaling parameter known as strength factor (fs) based on the ratio of hot strength (HMOR) to cold strength (CCS). Correlating the strength factor data (fs) with oxidative damage provides new insights into the reinforcing effects of distinct SiC morphologies in this new class of micro-composite fortified refractory systems over the standard compositions.